|
|
 |
CSA & UL Requirements
CSA:
ADHESIVE- TYPE LABELS - Western Canada * * * TYPE- A * * * HEAVY DUTY Pressure - sensitive '300'** COMPUTER IMPRINTABLE WHITE and SILVER POLYESTER 3.5 mil to 4.5 mil with screen process printing.
USE:
- Indoor and outdoor on metal and plastic Group I (max temp 100c) and plastic Group II. III, IV, V,VI, VII, and VIII. (max temp 80c).
- Pressure - sensitive "467MP" and "468MP"
POLYCARBONATE
USE:
- Indoor and outdoor on metal and plastic Group I (maxtemp 100c) and plastic Groups II.III, IV, V, VI, VII, and VII . (max temp 80c) .
- Pressure - sensitive "200"**
ALUMINUM FOIL, 5.5 mil with screen process printing.
USE:
- Indoor and outdoor on metal and plastic Group I (max temp 100c) and plastic Groups II. III, IV, V VI, VII, and VIII. (max temp 80c).
- Pressure - sensitive "320"**
ALUMINUM FOIL , 4 mil with screen process printing.
USE:
- Indoor and outdoor on metal and plastic Group I (max temp 100c) and plastic Groups II, III, IV, V, VI, VII, and VIII. (max temp 80c).
IDENTIFICATION MARK Block Letters PTI.
PLASTIC GROUP
| group I |
Phenolic |
Phenolic, melamines, urea formaldehyde |
| group II |
Polyphenylene Oxide |
Polyphenylene oxide, polyphenylene sulphide |
| group III |
Polycarbonate |
Polycarbonate, acetates, acrylics |
| group IV |
Polypropylene |
Polyetylene, polypropylene, polybutylene |
| group V |
Nylon |
Polyamide, polyamide |
| group VI |
Acrylonitrile- butadiene-styrene |
Styrene styrene acrylonitrile, acrylonitrile,- butadiene- styrene |
| group VII |
Polyvinyl Chloride (rigid) |
Polyvinyl chloride (riged), plastized, polyvinyl chloride |
| group VIII |
Glass- filled polyester |
Glass- filled polyester, Glass- filled epoxy |
UL:
PADTECH INDUSTRIES LTD. MH25132 (N) #15-7449 HUME AVE, DELTA B.C, CANADA V4G 1C3 Component - Marking and Labeling Systems.
"PTI80", "PTI83" (7980)(7983) removable intact. Affixed to stainless steel, galvanized steel, aluminum, alkyd enamel, acrylic paint, polyester paint, epoxy paint and porcelain enamel, maximum temperature 150 C (302 F); phenolic, polycarbonate and nylon plastic, maximum temperature 100 C (212 F); polypropylene, polyphenylene oxide and polystyrene plastic, maximum temperature 80 C (176 F); acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 60 C (140 F). Suitable where exposed indoors to high humidity or occasional exposure to water. Also suitable where exposed outdoors when affixed to stainless steel, galvanized steel, aluminum, alkyd enamel, acrylic paint, polyester paint, epoxy paint, porcelain enamel and phenolic, polyphenylene oxide, polystyrene and ABS plastic, minimum temperature -40 C (-40 F). Also suitable for printing using certain ribbon inks.
REPORT NOVEMBER 20, 1995
"PTI40", (7940) removable intact. Affixed to aluminum, galvanized steel, stainless steel and porcelain, maximum temperature 150 C (302 F), minimum temperature -40 C (-40 F); alkyd enamel and polycarbonate plastic, maximum temperature 100 C (212 F); minimum temperature -40 C (-40 F); polyphenylene oxide and acrylonitrile butadiene styrene (ABS) plastic, maximum temperature 80 C (176 F) minimum temperature -40 C (-40 F). Suitable where exposed indoor or outdoor to high humidity or occasional exposure to water. Also suitable where occasionally exposed to fuel oil Nos.1 and 2 when affixed to alkyd enamel or stainless steel.
"PTI 41", (7941) removable intact. Affixed to aluminum, galvanized steel, stainless steel alkyd enamel and porcelain, maximum temperature 150 G (302F), minimum temperature -40 C (-40 F), polycarbonate plastic, maximum temperature 100 C (212 F). minimum temperature -40 C (-40 F). polyphenylene oxide and acrylonitrile butadiene styrene (ABC) plastic, maximum temperature 80 C (176 F), minimum temperature 40 C (-40 F); Suitable where exposed indoor or outdoor to high humidity or occasional exposure to water.
REPORT: NOVEMBER 21, 1995, NOVEMBER 22, 1995
|
